Theoretical and experimental studies of a new aniline derivative corrosion inhibitor for mild steel in acid medium

4-Chloro-N-(pyridin-2-ylmethyl)aniline (CPYA) was synthesized by a simple and inexpensive method and tested as a corrosion inhibitor in acid medium for mild steel by using gravimetric studies and electrochemical measurements. An average maximum efficiency of 96.0% was achieved at 4.59 mmol/L. Corrosion kinetic and thermodynamic parameters were also analyzed. Surface analyses (atomic force microscopy and scanning electron microscopy) show that protection is enabled by adsorption on the metal, forming a film. Quantum chemical calculations were performed to access information regarding the molecular structure in the corrosive medium and to support interpretation of the results obtained by experimental methods.     

Sulfonylguanidine Derivatives as Potential Antimelanoma Agents

Sulfonylguanidines are interesting bioactive compounds with a broad range of applications in the treatment of different pathologies. 2-Aminobenzazole-based structures are well employed in the development of new anticancer drugs. Two series of novel N-benzazol-2-yl-N′-sulfonyl guanidine derivatives were synthesized with the sulfonylguanidine in either an extra- or intracyclic frame. They were evaluated for their antiproliferative activity against malignant melanoma tumor cells, thus allowing structure-activity relationships to be defined. Additionally, NCI-60 screening was performed for the best analogue to study its efficiency against a panel of other cancer cell lines. The stability profile of this promising compound was then validated. During the synthetic process, an unexpected new deamidination of the sulfonylguanidine towards sulfonamide function was also identified.     

A pragmatic approach to hierarchical categorization of research expertise in the presence of scarce information

International Journal on Digital Libraries - Throughout the history of science, different knowledge areas have collaborated to overcome major research challenges. The task of associating a...     

Modified Galacto- or Fuco-Clusters Exploiting the Siderophore Pathway to Inhibit the LecA- or LecB-Associated Virulence of Pseudomonas aeruginosa

Galacto- and fuco-clusters conjugated with one to three catechol or hydroxamate motifs were synthesised to target LecA and LecB lectins of Pseudomonas aeruginosa (PA) localised in the outer membrane and inside the bacterium. The resulting glycocluster–pseudosiderophore conjugates were evaluated as Trojan horses to cross the outer membrane of PA by iron transport. The data suggest that glycoclusters with catechol moieties are able to hijack the iron transport, whereas those with hydroxamates showed strong nonspecific interactions. Mono- and tricatechol galactoclusters ( G1C and G3C ) were evaluated as inhibitors of infection by PA in comparison with the free galactocluster ( G0 ). All of them exhibited an inhibitory effect between 46 to 75 % at 100 μM, with a higher potency than G0 . This result shows that LecA localised in the outer membrane of PA is involved in the infection mechanism.     

Preparation and characterization of multilayer anti-reflective coatings via sol-gel process

Single layer and multilayer films consisting of SnO₂, Ta₂O₅, SiO₂, TiO₂, indium tin oxide (ITO) and antimony tin oxide (ATO) have been prepared by sol-gel dip coating technique. All of the multilayer films contained a SiO₂ top layer, which was composed of SiO₂ nanoparticles. The other films had polymeric character. Obtained films were characterized by ellipsometry, XRD, AFM and SEM. Light transmittance values of the films were compared. Films other than SiO₂ and Ta₂O₅ were found to have crystalline structure. Thickness values of the films were in the range of 30–115 nm and roughness values were in 1.2–23 nm range. Single layer porous silica provided 95% light transmittance, whereas ITO-TiO₂-SiO₂ multilayer film provided a light transmittance of 97.2%.     

In vitro cytotoxicity of monticellite based bioactive ceramic powder synthesized from boron derivative waste

The cytotoxicity of monticellite based bioactive ceramic powder, which was synthesized from boron derivative waste has been determined by in vitro assays of MTT, NRU, and JC-1 staining. The toxicity of powder on different mammalian cell lines (3T3-L1, HUVEC, CRL-2120) was evaluated at the concentrations of 10, 100, 200, 400 and 800?µg/mL to justify its potential for biomedical applications. The obtained results showed that monticellite based bioactive ceramic powder possesses not only bioactive feature but also biocompatible characteristic at the concentration range of 10–200?µg/mL. Hence, monticellite based bioactive ceramics have high potential as a bone graft substitute for bone void filling and coating applications.     

Microstructural,mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating

Brittleness, relative high friction coefficient and wear rate limit the applications of ceramic coatings as wear-resistant layers. However, because embedding additives with ceramic matrix has demonstrated to be an effective way to improve coating performances, different contents and size of h-BN were added into an YSZ suspension. Afterwards, the YSZ/h-BN composite coatings were manufactured by suspension plasma spray and their tribological analysis indicated that: i) the reduction of the friction coefficient and wear rate can be achieved by incorporating h-BN into YSZ coating. ii) finer h-BN particle is more helpful to enhance the tribological properties of the coating. iii) the optimum content is dependent on h-BN particle sizes. iv) when the contents and the size of the h-BN inclusion increase, the probability distribution of the micro-hardness can become bi-modal. Three worn surface conditions were summarized and their wear mechanisms were discussed as well.     

Prediction and comparison of textural properties of magnetic copolymer supports for enzyme immobilization

Magnetic polymers supports have proven to be valuable materials for enzyme immobilization, as they allow recovering the catalyst by magnetic separation, precluding the need for costly and time-consuming separation steps. In this study, magnetic copolymer supports were synthesized using styrene (STY) and different crosslinking agents (divinylbenzene, ethylene glycol dimethacrylate, or triethylene glycol dimethacrylate) and initiators (azobisisobutyronitrile or benzoyl peroxide) and used to immobilize Candida antarctica lipase B (CALB). The aim was to obtain biocatalysts with high enzymatic activity and satisfactory morphological properties for use in biotransformation reactions. Two morphological properties known to influence the immobilization yield were taken into consideration, specific surface area, and swelling index. Experimental data were compared to the predictions of a model based on molar balance, method of moments, numerical fractionation, and elementary gel structures. The high correlation (R² = 0.9974) between experimental and predicted values demonstrated the suitability of the model for estimating the textural properties of enzyme supports. CALB was successfully immobilized, showing high hydrolytic activity (500–700 U g⁻¹) and good thermal stability at 50°C. CALB/STY-EGDMA-M was 14 times more stable than free CALB. The results confirm the efficiency of the immobilization method and the suitability of the copolymers for enzyme immobilization.